EPSON L-90 Label Printer

Below details are settings specific to adding an EPSON L-90 label printer

TM-L90 LFC - Epson Australia



Disable 'Paper Removal Standby'

This function if left enabled will stop further print jobs until the printed docket is removed. If left enabled this will cause major issues for your POS registers and this must be disabled.

The following steps will work by using the feed button. You have short presses * and long presses -
* = press the feed button for less than one second
- = hold the feed button for more than one second

Now, to start, turn the printer off. Press and hold the feed button down and turn it on again, release the feed button when you hear it printing. It will print something like this (shortened to save space).

Once printed, press the feed button for more than one second (-)

init1.png

Press the feed button 2 times for less than one second then hold for more than one second
(* * -)

Screen_Shot_2021-07-26_at_8.04.50_pm.png

Press the feed button 13 times for less than one second then hold for more than 1 second
(* * * * * * * * * * * * * -)

Screen_Shot_2021-07-26_at_8.03.32_pm.png

Press the feed button 5 times for less than one second then hold for more than 1 second
(* * * * * -)

Screen_Shot_2021-07-26_at_8.08.12_pm.png

Press the feed button 2 times for less than one second then hold for more than 1 second
(* * -)

Screen_Shot_2021-07-26_at_8.09.40_pm.png



When this receipt prints, press and hold the feed button for more than 1 second
( - )

Screen_Shot_2021-07-26_at_8.14.01_pm.png

Press for more than 1 second
( - )

Screen_Shot_2021-07-26_at_8.14.47_pm.png

You are now complete and ready to start printing!

Did this answer your question?